Home / News / Bakken News / Machine developed in Bakken Oil Field could lay large drainage lines in west central Minnesota farm fields
This Talon Wheel Trencher developed to lay pipeline in the Bakken Oil Field of North Dakota. The New London based manufacturer could produce a model capable of excavating trenches for large-diameter, underground drainage lines. (Courtesy Photo)

Machine developed in Bakken Oil Field could lay large drainage lines in west central Minnesota farm fields

OLIVIA — A machine developed to lay pipeline in the Bakken Oil Field of North Dakota could be put to work in Renville, Kandiyohi and neighboring counties to place large-diameter drainage tile parallel to open ditches.

Sub-surface lines would allow the public drainage systems to manage water without the costly improvement and permitting costs associated with upgrading ditches built 50 to 100 years ago, according to Kevin Lippert, Lippert Tile Plow LLC in Willmar.

Lippert, accompanied by Forrest Dahmes, of Two D Machines in New London, told the Renville County board of commissioners on Tuesday that Dahmes and his company could build a Talon Wheel Trencher that could install up to 60-inch diameter drainage tile 10-feet deep.

A Talon Wheel Trencher now at work in North Dakota is capable of excavating a trench for a 36-inch diameter line eight feet deep at the rate of 30-feet per minute. And, it can work through the winter. Frost three- to four-feet deep does not stop it.

Related: N.D. dairy farmer-turned-inventor outsmarts engineers with oilfield invention

Lippert said Prinsco and other manufacturers of plastic tile are anticipating this technology, and are able to produce large-diameter, plastic line that can be placed at greater depths.

The underground lines can be regulated by valves. The flows could rise and fall along with the open ditch they would parallel, according to Lippert.

Computer and laser technology allows the lines to be installed at precise grades to control the speed of flow in the lines. A smooth, enclosed line has a greater water carrying capacity for a given diameter than an open system, he noted.

Unlike an open ditch, the underground line would not carry erosion from sloughing banks to the Minnesota River.

And since the lines could be installed during the winter, there would be no crop losses.

The speed and efficiency of the machine would allow lines — even those built with more expensive plastics — to be installed at a lower cost as compared to excavation systems now employed, he told the board.

Lippert said he is arranging financing for a Talon unit that would allow him to install

250 miles of line per year. He needs to show that there will be the work to keep it busy in the region. He is planning to meet with neighboring county boards to determine interest in it.

 

This article was written by Tom Cherveny from West Central Tribune, Willmar, Minn. and was legally licensed through the NewsCred publisher network.

14 comments

  1. Couldn’t pay me a 100 an hour to run that

  2. They’ve been around for 100years.

  3. Can we look forward to you living in Renville county to operate one of these Mike Malecek???

  4. Shaggy must be running it!!

  5. Shaggy is a dam good trencher operator… A mile in 3hrs just isn’t realistic unless your digging through pure sand though

  6. That one is little! I was trained on this beast,but then again, everything is bigger in Texas!

  7. 1000 ft an hour but it can’t dig in rock